Description
Complete Leeson Lotus/Ford straight-cut gear box with aluminum tail-shaft housing. I purchased this Leeson box fully rebuilt by Craig Chima over a decade ago. I used it in my Super Seven for less than one weekend (before I lost the engine). After that weekend I decided to rebuild the Super Seven into a road spec car and the Leeson gearbox was put on the shelf. The gearbox works perfectly and remains basically as new/rebuilt. In minutes you’ll be making instantaneous clutchless up and down shifts. The aluminum tail-shaft housing saves almost 8 pounds over the original housing. The Leeson gear box will accept in excess of 200 HP. All four forward gears ratios are useful on track basically giving you an extra racing gear over any of the original Lotus/Ford products. This box has the following forward ratios plus reverse; 1st 2.250:1 2nd 1:578:1 3rd 1.213:1 4th 1:1