Description
This is a brand new Bertils USF-3 2.0L long block motor Dry sump. This was slated as a back-up for motor #02 which is also available but not included. According to Bertil Sollenskog, these motors were "bulletproof" and considerably undertuned in USF-3 tune for series longevity and driver safety. They can make more power safely. In current tune, makes 190hp between 5000-7400rpm. This is a NEW motor, not rebuilt, zero hours since leaving Bertils Racing Engines facilities. Motor #02 is also available with 46mm TWM ITBs port matched to this engine. Motor #02 has very little time judging by the carbon deposits on the exhaust ports. This motor is available for $7000.00 or $13K for both motors. Shipping is extra
Connecting Rods: 144mm Carrillo forged, balanced and polished
Pistons: 82.5 forged Wiseco
Camshaft: 301* BRS F3 grind
Valves: Intake 40.5mm, exhaust 35.0mm
Valve Train: see below
Flywheel: Formula 3
Exhaust: n/a
Total Time: zero
Races: zero
12.4:1 Compression Ratio Full dry sump Lifters BRS 37mm, shim under buckets Valve springs BRS 37mm Germany Retainers BRS Titanium ARP bolts and studs installed as follows: main studs, rod bolts, head studs
