Description:

EX VINCE GRANATELLI INDYCAR THEN IN 93 HAD CANAM BODY FITTED TO USE IN INTERSERIE OTHERWISE CAR IS STANDARD INDY CAR CAN BE USED AS INDY CAR OR INTERSERIE WITH THE CANAM BODY ON, DRIVEN IN INTERSERIE BY ROBIN DONOVAN AND JOHN BARTLETT RUN BY WEYLOCK RACE ENGINEERING HERE IN THE UK WHICH WAS A 2 CAR TEAM THE OTHER CAR WAS SOLD FOR £38K SO YOUR GETTING A BARGAIN HERE NEEDS ASSEMBLING ENGINE HAS DAMAGED CAM ROLLER FOLLOWER AND ALL PARTS ARE AVAILABLE FROM INDYBUICK.COM NEW AND PRICES FOR PARTS IS CHEAPER THAN BUILDING A FORMULA FORD AND YOU HAVE 3 CHOICES OF RUNNING IN SPEEDWAY SETUP,ROADCOURSE SETUP,OR CANAM INTERSERIE SET UP, THE CHOICE IS YOURS,AND THIS PROJECT IS A COMPLETE CAR WITH ENGINE AND A HOST OF SPARES,ITS JUST BEEN TAKEN APART FOR RESTORATION BUT IS A STRAIGHTFORWARD EASY PROJECT


History

LAST RACED IN EUROBOSS IN 2000 WITH BOB BERRIDGEEngine

• VGR
  
• BUICK INDY TURBO
  
• 3300
  

Fuel System

• 
  
• PREMIER
  
• 1993
  
• COSWORTH
  
• METHANOL
  

Oil/Water System

• ALLOY
  
• LH SIDEPOD
  
• COSWORTH
  
• SERK
  
• RH SIDEPOD
  

Electrical System

• COILPACKS
  
• MARRELLI
  
• 12V
  
• NONE
  
• BUICK
  

Transmission

• LOLA HEWLAND DGB INTERNALS
  
• INDY
  
• H PATTERN 5 SPEED
  
• YES
  
• 2 RACES
  

Rear End

• LOLA HEWLAND
  
• TRANSAXLE
  
• 2 RACES
  

Body

• CARBON FIBRE
  
• RED
  
• FAIR NEEDS REPAINT
  
• INTERSERIE BODY FIBREGLASS
  

Chassis

• MONOCOQUE
  
• LOLA
  
• CARBON TOP ALLOY HONEYCOMBE
  
• VERY GOOD NO ACCIDENTS
  
• PUSHROD IN BOARD ROCKERS NICKEL PLATED
  
• PUSHROD INBOARD ROCKERS NICKEL PLATED
  
• KONI GAS
  
• BREMBO
  
• LOLA
  
• LOLA
  
• GOODYEAR LIKE CONCRETE
  

Interior

• YES
  
• YES
  
• YES
  
• YES
  

Spares

• 10 SETS WHEELS ,FRONT AND REAR UPRIHGHTS,FRONT AND REAR WISHBONES,DRIVESHAFTS,
  
• FRONT AND REAR WINGS SIDEPODS COMPLETE,LOTS CARBON PANELS BRAKE DUCTS ETC
  
• FRONT AND REAR HUBS,LOTS DISCS,PAIR SPARE CYL HEADS COMPLETE,LOOMS,COILPACKS,
  
• ENGINE COVER,EXHAUST SYSTEMS,REAR FLOORS,SCREEN, TURBO HOUSING,ROCKERS,
  
• GEARBOX,SIDEPLATES,BEARING CARRIERS,END COVERS,CROWNWHEEL AND PINION,CUTCH INPUT
  
• ROLLOVER HOOPS,PLENUM,INJECTERS,FUEL RAILS,WATER RAILS,PLUMBING,GEARBOX PLATES
  
• OUTPUT FLANGES,WATER RADS,SUSPENSION SHEARPLATES,SPARE INTERSERIE BODY,
  
• ENGINE PLATES,ETC ETC ETC AND A LOT OF THE SPARES ARE NEW NOT ROOM TO LIST