Description:

Spare car for KnightHawk racing team. Currently prepared for SCCA CSR class. Has all chassis and motor updates since WSR series began.
Engine

• Toyota 4AG 1613cc twin cam version D
  
• Prepared by Loyning Engine Builders 10/18/01 (dynoed @ 175hp)
  
• Less than 2 hours since rebuild
  
• Custom port and polish by Arnie Loyning
  
• Harmonic balancer in place
  
• TWM inducton manifold
  
• 12.35:1 compression ratio
  
• 42mm supercharged crank
  
• 42mm supercharged connecting rods with ARP hardware
  
• JE forged aluminum pistons
  
• High volume oil pump
  
• Custom sump with baffles and extra capacity
  
• SuperTrapp stainless muffler with new packing
  

Fuel System

• Fuel-Safe 8 gallon fuel cell
  
• SX-Performance remote fuel pressure regulator with pressure gauge
  
• Aeroquip fittings throughout
  
• Bosch electric high pressure fuel pump
  
• Kinsler inline fuel filter
  

Oil/Water System

• High capacity radiator located at right rear tunnel (water wetter)
  
• High capacity Earl's oil cooler located at left rear tunnel (mobil 1)
  
• Remote oil filter
  

Electrical System

• Pectel T2 Motorsport ECU
  
• Pectel data logging with software and datalink cable
  
• Custom mapping by Arnie Loyning
  
• New Pectel wiring loom (fully labeled and sheathed)
  
• Injectors flowed and tested 4/02
  
• New Odyssey AGM racing battery
  
• New alternator (driven at half shaft)
  
• Aircraft quality switches and harness
  

Body

• Hand laid fiberglass
  
• Inter-locking keyed structures
  
• Louvered nose with retention pins
  
• Aluminum latches
  
• Aluminum adjustable wing
  
• Adjustable front splitter
  
• Black with red center feature
  
• CIPA mirrors
  

Chassis

• Chromoly & mild steel space frame
  
• Fixture welded replaceable sub structures
  
• Engineered crush zones
  
• Bonded and riveted steel floor pans
  
• Carrera 6340 E model, Eibach springs 2.25 x 6.00 ERS
  
• double wishbone, coil over shock
  
• lower wishbone, Upper ratio rocker & inboard coil over shock, nickel plated
  
• Manual rack & pinion, Removable suede OMP steering wheel
  
• 4 wheel ventilated discs, front brake ducting from tunnel, carbon pads, bias adjuster in cockpit
  
• 3 sets of wheels, 2 new style 13's BBS silver center (7's front, 9's rear), 1 set 13's weld (6's front. 7's rear)
  
• 1350 pounds
  

Interior

• Simpson 6 point harness
  
• Autometer gauges
  
• Fully adjustable steering, shifer, and pedal locations
  
• Padded head area
  
• Wind splitter
  

Spares

• Complete nose with louvers painted to match
  
• complete spare motor
  
• steel motor cradle with wood shipping crate
  
• complete carburetor induction system with original fuel pump and wiring loom
  
• 2 sets of hoosier slicks 50%
  
• 1 set yokohama rains new
  
• various suspension and brake components
  
• extensive original documentation
  
• 2 fuel filter cartridges
  
• 4 eibach springs
  
• carbon dash panel